Gransnet forums

Food

How to make a gingerbread cylinder- advice please!

(22 Posts)
Callistemon21 Sat 23-Dec-23 15:11:35

Well done ๐Ÿ™‚

Thanks for the reminder to take the red cabbage out of the freezer!

lixy Sat 23-Dec-23 13:21:06

Well, it's done!
I wrapped a rectangle of 'construction gingerbread biscuit' around the rolling pin as soon as it came out of the oven and left it to cool. The nose cone didn't work so we cut some triangles. The tail fin broke off during decoration so we have some gold coins to spill out of the back.
GS is very pleased with it. Phew!

Now on to the red cabbage.

V3ra Wed 22-Nov-23 22:55:36

Callistemon21

You could line the tin with baking paper.
I'd recommend opening with a tin opener rather than using the ring pull which does leave a ridge.

As well as lining it I'd also suggest using a tin opener to cut the bottom off the tin, after you've baked the bread or gingerbread, then you could just push it out.
Hopefully ๐Ÿคž

CanadianGran Wed 22-Nov-23 21:09:11

I just saw on a baking show where the baker used a baguette loaf pan, but the odds are you don't have one.

You might use a pringles tin, wrapped in tinfoil first. If you cut it in half lengthways, you would probably get a better bake, then glue the pieces together with royal icing.

lixy Wed 22-Nov-23 16:41:22

Elegran

lixy The soup tins need careful greasing - the top edge may be sharp and cut your knuckles - and the ones with ridges in particular will stick to the contents if the grease misses a bit. Getting the bread out can involve a lot of poking a spatula down the side and cursing under your breath.

I might practice that one when I'm 'home alone' sometime!

A friend has suggested a baguette baking tray which is looking hopeful. I need to actually see one to have a better idea of whether it will work so will just have to visit Lakeland - what a shame!

Callistemon21 Wed 22-Nov-23 11:19:44

You could line the tin with baking paper.
I'd recommend opening with a tin opener rather than using the ring pull which does leave a ridge.

Elegran Wed 22-Nov-23 10:05:43

lixy The soup tins need careful greasing - the top edge may be sharp and cut your knuckles - and the ones with ridges in particular will stick to the contents if the grease misses a bit. Getting the bread out can involve a lot of poking a spatula down the side and cursing under your breath.

lixy Wed 22-Nov-23 09:40:48

oooh I hadn't thought of baking it inside a cylinder; I was more of the 'draping it while it's warm' train of thought. Thank you. Love the 'soup bread' idea - that's one for the memory bank.

Fondant Biggles! I'll have a go though I think he might feature on the home-baking disaster section of GB Bake off extra slice, my piping skills not being patisserie standard in any way at all,

I'll post a picture of the finished article, crash landings permitted,

Elegran Wed 22-Nov-23 09:30:25

The biscuits will probably curve round something better while they are still warm from the oven.

Elegran Wed 22-Nov-23 09:28:16

Bake the gingerbread in an empty soup tin? I used to do this with bread dough to make round "soup bread" slices (to eat with our soup, of course. That tickled the children and made them more wlling to eat soup.) The tins with ridges round them made little loaves with cutting lines on.

keepcalmandcavachon Wed 22-Nov-23 08:47:43

Callistemon gringringrin
lixy Little fondant snowman with a cap and 'Biggles' goggles!

Callistemon21 Tue 21-Nov-23 22:00:32

Ginger snap plane zooming across the kitchen filled with cream ๐Ÿ›ฉ
Sorry, it's just me. I'm sure your DGS won't do that ๐Ÿ˜

lixy Tue 21-Nov-23 21:34:36

That sounds ominous - I haven't but why?

Callistemon21 Tue 21-Nov-23 21:32:39

Hope you haven't just decorated the kitchen, lixy

Callistemon21 Tue 21-Nov-23 21:31:55

lixy

Now there's an idea, thank you.
A cream-filled plane sounds a lot of fun!

๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚

lixy Tue 21-Nov-23 21:28:44

Now there's an idea, thank you.
A cream-filled plane sounds a lot of fun!

Callistemon21 Tue 21-Nov-23 19:39:42

Auntieflo

How about using a recipe for Rolled up Ginger Snaps, when they are made rolling the mixture around a greased wooden spoon handle? But rolling it around a rolling pin?
Don't know if it would possibly work, but then I was never very good making the little ones.

Yes - I was just about to suggest a brandy snap, AuntieFlowhich can be moulded, rather than a cake/biscuit which might crack.

Ooh, brandy snaps filled with cream, I haven't eaten one for years. Yum!

Auntieflo Tue 21-Nov-23 19:26:32

How about using a recipe for Rolled up Ginger Snaps, when they are made rolling the mixture around a greased wooden spoon handle? But rolling it around a rolling pin?
Don't know if it would possibly work, but then I was never very good making the little ones.

lixy Tue 21-Nov-23 19:20:12

Thank you both!
My internet searches are verging on looking as though I have an obsession!
I usually use a recipe that I found in a magazine about a zillion years ago. It makes sturdy houses but I've never tried curving it - think I'll just have to have a trial run. Oh dear, gingerbread to eat up? What a shame! [wink}

keepcalmandcavachon Tue 21-Nov-23 16:38:58

No experience of gingerplanes sorry, but love this ideagrin.
I'm sure someone here will be able to help though and would like to wish you and your GS a very merry afternoon making it!

Nannarose Tue 21-Nov-23 16:36:01

I have done one round a cylinder, many years ago. I think I checked it early because you don't want the biscuit getting too crisp.
I think I would also consider several slabs, held together with royal icing - I did this for a 'rocket' - 6 slabs all upright.

I don't know what recipe you use, I have an American one that rests the dough overnight, and have found that one much more forgiving thn my older recipe.

lixy Tue 21-Nov-23 16:25:59

My GS has decided to alter our traditional gingerbread house making afternoon a little this year. He would like to make a 3D gingerbread aeroplane. This would be using the biscuit-style gingerbread rather than the cake type.

I have a cream horn cone so can use that to make the nose, and I said ;no way' to the propellers; this is going to be a jet!

Any idea how I can make a cylinder for the body?
I had thought of shaping it round a couple of empty tins but have no experience of this - anyone with a tried and tested idea?