Sanding waterbased gloss is a complete bitch..

The satinwood I used in the hall (wish I hadn't) seems to be slightly sticky still - after a year. I think I'd only attempt to sand it, very lightly, with fine emery paper, just to dull the surface.

Next time, I'm using oil-based eggshell!

Message deleted by Gransnet. Here's a link to our Talk Guidelines.

We did have someone to do the hall, stairs and landing last time and he did ask me if I was sure about the satinwood. Yes please, said I, firmly.
I wish I'd listened to him.

PS. I’ve always used oil based paints in the past and they are worth the effort.

Yesterday I realised how difficult acrylic (plastic) paint is to work with. It’s not easy to work with as even after sanding the item it’s all smeary and even after a second coat it’s not much better. This is just the primer. I’ve also found the finish does not last for long.

I’m hoping to be able to find good old oil based paints for any future paint jobs. What’s the point of all the effort to finish up with something that does not last?

I wonder what the environmental impact is of plastic paint versus oil based paints especially as the brushes are washed in water and all this goes down into the water system?

I don’t suppose there is any good environmental outcome for either style of paint.

My dh used to be an old fashioned style decorator.

He was a sticker for undercoat (oil based) and proper oil based gloss.

I think if you want a long lasting hard wearing surface it has to be the old fashioned oil based paints.

As op says the water based paints are horrendous to sand down.

But sometimes we just want a quick freshen up and go for the quick drying water based paints.

I do find they yellow quickly, If I wanted a quick job(say I was moving house wanted to freshen up, then I would use the quick dry water based) but otherwise the task of undercoating and glossing would be the order of the day.

It's a bit disappointing JuneRose but you live and learn eh!

Oh maybe that's what we've got - satinwood - agree with all the comments.

stains from a plant pot on a window sill ditto. Damned annoying. The more I tried to clean it off, the duller and worse it got.

No, we have marks on doors, skirting boards etc and stains from a plant pot on a window sill which are impossible to wash off.. It's very disappointing

I was just thinking the same today Callistemon. I only redecorated this house 1 year ago and did all the woodwork in satinwood instead of gloss. It's looking really rather grim already; very dull and marked, especially on the banister where it's touched a lot. Thought it was just me being a rubbish decorator.

We I chose satinwood last time but never again.
It retains marks and is difficult to wash.
We'll go back to old-fashioned gloss next time.

It's weird stuff isn't it - it goes sort of sticky when you wipe it down. It marks when you stand anything on it. And is clearly a pain to get rid of! Not the best.

Oh Mary, apologies. I thought you were putting on new paint, and sanding between coats.

Auntieflo it's had 4yrs to dry!

We are at the moment chipping off all the gloss paint in our hallway that the previous owners put on over a 25 year period- I feel your pain!
The problem is caused when each new layer is applied without sanding. There’s no easy solution....

Friends used to use a primer which was just painted on and made the surface have a grip for painting. I think Dulux do one.
I can't tell you how well it worked though.

That's one job I loathe - sanding down paintwork. I'm sure it started off my RSI, but I was doing a lot in one go. Do be careful.

Mary, you have let it dry properly I suppose.

Nope, don't think you're unreasonable. What about using a small electric mouse sander that you can easily change the sandpaper on?