Gransnet forums

Arts & crafts

Embroidery Frames

(11 Posts)
Electricduck Tue 22-Feb-22 17:27:53

Hi, new to Gransnet and to embroidery! I’ve bought an embroidery kit that calls for a 24x16 inch rectangle frame. I have a 9” round frame already. Stupid question I’m sure but… Before I rush out and buy a new frame (all-the-gear, no idea!) can I make do with the smaller round one and move it every time I get to the edge? The kit is to make a cushion.

spottybook Tue 22-Feb-22 17:53:52

I can’t get on with large frames so I use a hand held round frame and move it around. I do, however, make sure not to leave the embroidery in the frame when I’m not working on it. Enjoy your project.

Germanshepherdsmum Tue 22-Feb-22 18:22:47

It’s a while since I did embroidery but I used to do pictures, easily the size of a cushion cover, and had a round frame like yours. No problem.

Electricduck Tue 22-Feb-22 23:55:58

Thank you. I suspect a smaller frame will suit me better so I’ll see how I get on.

BlueBalou Wed 23-Feb-22 09:11:02

Larger frames are easier if attached to a floor stand, I used circular hoops all the time.

Purplepixie Wed 23-Feb-22 12:41:09

I always use a larger round frame and move the work around. It’s better to have something that you can handle comfortably than struggle with anything else. Happy embroidery!

Whiff Thu 24-Feb-22 05:17:20

I always use a 6" spring loaded round frame for all my cross stitch no matter the size of my project. I can't hold a larger frame. Square frames my fabric always slips . And wooden roller frames are uncomfortable to use.

As it's for a cushion what fabric are you using? If it's canvas you can't use a frame as the fabric is to stiff. If it's Aida or evenweave then you can use a frame.

Electricduck Fri 25-Feb-22 16:25:44

I bought a kit (Gobelin). The instructions are very basic. It’s a 100% cotton canvas but it’s very stiff and I’m struggling to squish it into the round frame! Not sure what I’m doing wrong but it doesn’t want to stay in the frame and I can’t do it up! I’ve started the project without but any thoughts on the frame fitting?!

grandMattie Fri 25-Feb-22 16:31:09

I use a tapestry frame that rolls up the fabric you've already embroidered. I'm sure Hobbycraft or good haberdashers would have them.

grandMattie Fri 25-Feb-22 16:32:54

something like this?
www.etsy.com/uk/listing/1131724676/traditional-wooden-roller-frame-rotating?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_uk_en_gb_b-craft_supplies_and_tools-other&utm_custom1=_k_EAIaIQobChMIjqfW8KOb9gIVB7DtCh3yBwBNEAQYAiABEgKtFPD_BwE_k_&utm_content=go_325949688_20231944488_88478152968_aud-371913912633:pla-106551294035_c__1131724676engb_102858184&utm_custom2=325949688&gclid=EAIaIQobChMIjqfW8KOb9gIVB7DtCh3yBwBNEAQYAiABEgKtFPD_BwE

Ali08 Fri 04-Mar-22 19:12:55

Yes, of course you can. But may I suggest binding it first? They can leave marks on your work or work can slip. So stitchers often bind them using rough ribbon, to stop all that!
Try online group 'Cross Stitch Friends in The UK' for loads of advice and also mentors. It's run by Angie Clementson and Jules Roberts. You'll get loads and loads of help in there.