Teacheranne
trisher
Possible causes- you could have a tiny leak somehere you haven't seen. You can buy stuff you put in which seals these.
You may have air in the system- have you bled your radiators?
Your system may need cleaning there is stuff you put in the system which does this (think it's magnetic or something)
My DSs have done all of these for me at different times.I’ll chat to the engineer at the annual service about any leaks in valves.
Radiators all checked this morning, no apparent leaks.
Boiler only five years old.
Radiators are bled annually at the service.
The system was cleaned out when the new boiler was fitted and I had something installed to keep it cleaned - no idea what it was though!
Could be low water pressure in the area, will ask my neighbours.
Luckily I know what to do, the two taps are easy to use and within a few seconds of adding water, the boiler came on again. It is inconvenient though especially in the winter so I thought I should try to investigate further.
A combi boiler is much cheaper to run though especially when there is only one person in the house using hot water, no great big tank to fill up!
I have a combi here and in last house. Radiators do need bleeding if your heating has been off for some time, particularly if you have a large house. Air gets in (don't ask me how) You can sometimes tell if they need doing because they make noises when they come on and if there is a lot of air the tops don't get properly hot. It was always a problem in my 3 storey house when we put the heating on in the winter. I got quite good at it. Depends on your radiators how its done. Google it for instructions.



